We were approached by a construction company who were renovating a building which had originally been a work house in the 1800's. The building was being extended at the rear and as it was going to be residential a number of additional window and doorway openings were required. Due to the age of the building the walls were solid brick and up to 14 inches thick. After a demonstration the company purchased an ICS 695GC Petrol Saw complete with a 14" bar and chains.
The 695 saw can be fitted with 12, 14 or 16" guidebars and chains and gives the user the ability to create deep cuts with square corners. Plunge cutting using Diamond Chainsaws eliminates overcuts associated with using disc cutters, this in turn negates the necessity to make good once cutting is finished.
ICS have been making diamond chain for over 25 years and are the founders of diamond chain technology. ICS chains have constantly been developed over this period and are fitted with patented Seal Pro. Seal Pro are tiny O rings which prevent abrasive slurry prematurely wearing the rivets and tie straps in the chain, this vastly reduces chain stretch.
The 695 is a powerful and reliable workhorse which proves to be a problem solver time and again. A variety of chains are manufactured by ICS to suit a wide range of materials. To find out more about ICS Diamond Chainsaws call us on 0121 506 6095 or CLICK HERE to go to the ICS Diamond Chainsaw Section.