Hydroweld Bipolar Circuit Breaker WCB
The Hydroweld Bipolar Pole Switch CB are a quality welding circuit breaker available as 400A and 600A models and come complete with amp meters.
The circuit breaker is designed to break both the negative (-) and positive (+) side of the circuit with a single throw of the switch so ensuring there is no electrical potential to the diver.
The voltage meter allows both the open circuit voltage (OCV) and arc voltage to be monitored during the welding operation. The ammeter provides analogue monitoring of the current. When the circuit is broken a zero reading on the volt meter confirms there should be no electrical potential to the diver.
The input/output connections are all Dinze type panel mounted, with plugs to the welding power source (machine) and sockets to the work/electrode.
The WCB is designed for use in welding or cutting operations where the electrical parameters do not exceed the maximum current/voltage rating for the unit. They are available in either 400A or 600A DC models, both of which are capable of breaking up to their maximum rating under load. The WCB can be used with either Positive (+) or Negative (-) polarity by reversing the output cable
Enquiry: Hydroweld Bipolar Circuit Breaker WCB
Need to know more about our Hydroweld Bipolar Circuit Breaker WCB?
Give us a call on +44 121 506 6095 or drop us an email to enquiries@echopkins.com
Alternatively you can request a callback below, fill out the form and we'll be in touch as soon as possible.
